Technical DataΒΆ
The System Data of AC500 and S500 System Data AC500 are valid for standard version.
The System Data of AC500-XC System Data AC500-XC are valid for the XC version.
Only additional details are therefore documented below.
| Parameter | Value |
|---|---|
| Internal Supply | Via the communication module interface of the terminal base |
| Protocol | ETHERCAT |
| Field bus connector | 2 x RJ45 (ETHCAT1 and ETHCAT2) |
| Technology | Hilscher netX100 |
| Transfer rate | 10/100 MBit/s (full-duplex) |
| Transfer method | According to ETHERNET II, IEE802.3 |
| Bus length (segment length max.) | 100 m @ 100 MBit/s |
| Indicators | 5 LEDs |
| Usable CPUs | PM57x, PM58x, PM59x PM57x (-y), PM58x (-y) and PM59x (-y) PM56xx: PM56XX |
| Usable terminal bases | All TB5xx TB51x-TB54x All TB56xx: TB56xx |
| Ambient temperature | System data AC500 System Data AC500 System Data AC500 XC System Data AC500-XC |
| Current consumption from 24 V DC power supply at the terminal base of the CPU | Typ. 85 mA |
| Internal supply | Via the communication module interface of the terminal base |
| Number of slaves | Limited to 200 |
| Quantity of input and output data for a single slave | Max. 5760 byte (respectively for input and output) |
| Total quantity of input and output data | Max. 5760 byte (respectively for input and output) |
| Supported protocols | RTC - Real-time cyclic protocol, class 1 RTA - Real-time acyclic protocol |
| Acyclic services | - CoE upload - CoE download (1500 bytes max.) - Emergency |
| Min. bus cycle | 1 ms |
| Max. size of the bus configuration file | 2 MB |
| Weight | Ca. 170 g |