CS31 Bus Connections

The CS31 bus is connected through the Terminal Unit with the terminals 1.0 to 1.7. The end-of-line resistor can also be activated by using external wire jumpers.

The following figure shows a CS31 bus module at the end of the CS31 bus (end-of-line resistor activated).

CS31 bus module at the end of the CS31 Bus

The following figure shows a CS31 Bus module in the middle of a CS31 Bus (end-of-line resistor not activated).

CS31 Bus module in the middle of the CS31 Bus

Details on CS31 wiring is described seperately CS31 system bus.