Technical \ Data of the Configurable Digital Inputs/Outputs¶
Each of the configurable I/O channels is defined as input or output by the user program. This is done by interrogating or allocating the corresponding channel.
| Parameter | Value | |
|---|---|---|
| Number of channels per module | 16 inputs/outputs (with transistors) | |
| Distribution of the channels into groups | 1 group of 16 channels | |
| If the channels are used as inputs | ||
| Channels I8…I23 | Terminals 3.0…4.7 | |
| If the channels are used as outputs | ||
| Channels Q8…Q23 | Terminals 3.0…4.7 | |
| Indication of the input/output signals | 1 yellow LED per channel, the LED is ON when the input/output signal is high (signal 1) | |
| Electrical isolation | From the CS31 system bus | |