Technical DataΒΆ
The System Data of AC500 and S500 System Data AC500 are valid for standard version.
The System Data of AC500-XC System Data AC500-XC are valid for the XC version.
Only additional details are therefore documented below.
| Parameter | Value |
|---|---|
| Protocol | Programmable with Automation_Builder e.g. MODBUS / ASCII via serial interfaces |
| Interface | Serial interface |
| Serial interface standard | EIA RS-232 or EIA RS-485 |
| Potential separation | Yes, from the CPU, 500 V DC |
| Serial interface parameters | Configurable via software |
| Modes of operation | Programming or data exchange |
| Transmission rate | 9.6 kBit/s to 187.5 kBit/s |
| Protocol | Programmable |
| Interface connector | MC 0.5/9-G-2.5, 9-pin, male |
| Processor | PowerPC |
| Usable CPUs | PM57x, PM58x, PM59x PM57x (-y), PM58x (-y) and PM59x (-y) |
| Usable terminal bases | All TB5xx TB51x-TB54x |
| Ambient temperature | see: System data AC500 System Data AC500 System Data AC500 XC System Data AC500-XC |
| Communication module bus | Dual-port memory, 8 kByte |
| Internal power supply | Through the communication module bus of the terminal base |
| Current consumption from 24 V DC power supply at the terminal base of the CPU | Typ. 80 mA |
| Internal RAM memory | 256 kByte |
| External RAM memory | - |
| External Flash memory | 512 kByte (firmware) + 2 x 64 kByte (user data) |
| Status display | PWR, RDY, RUN, STA, ERR |
| Weight | Ca. 150 g |