Technical Data¶
The System Data of AC500-eCo apply System Data AC500-eCo
Only additional details are therefore documented below.
General Data
| Power supply | 24 V DC | 100 - 240 V AC |
|---|---|---|
| Connection of power supply | Via removable 5-pin screw terminal | |
| Current consumption from power supply (max.) | PM554-TP: 180 mA PM554-TP-ETH: 190 mA PM554-RP: 220 mA PM556-TP-ETH: 190 mA PM564-TP: 210 mA PM564-TP-ETH: 220 mA PM564-RP: 240 mA PM564-RP-ETH: 250 mA PM566-TP-ETH: 220 mA |
PM554-RP-AC: 200 mA at 100 V AC, 110 mA at 240 V AC *) PM564-RP-AC: 210 mA at 100 V AC, 125 mA at 240 V AC *) PM564-RP-ETH-AC: 220 mA at 100 V AC, 130 mA at 240 V AC *) |
| Current consumption from power supply (typ.) | PM554-TP: 60 mA PM554-TP-ETH: 70 mA PM554-RP: 80 mA PM556-TP-ETH: 70 mA PM564-TP: 95 mA PM564-TP-ETH: 100 mA PM564-RP: 110 mA PM564-RP-ETH: 120 mA PM566-TP-ETH: 100 mA |
PM554-RP-AC: 20 mA at 100 V AC, 12 mA at 240 V AC *) PM564-RP-AC: 20 mA at 100 V AC, 11 mA at 240 V AC *) PM564-RP-ETH-AC: 23 mA at 100 V AC, 14 mA at 240 V AC *) |
| Inrush current at nominal voltage | Typ. 3.9 A²s | Typ. 0.3 A²s |
| Required fuse | 3 A fast | Max. 10A |
| Max. power dissipation within the processor module | PM554-TP: 3.0 W PM554-TP-ETH: 3.3 W PM554-RP: 3.5 W PM556-TP-ETH: 3.3 W PM564-TP: 3.9 W PM564-TP-ETH: 4.4 W PM564-RP: 4.5 W PM564-RP-ETH: 4.9 W PM566-TP-ETH: 4.4 W |
PM554-RP-AC: 4.8 W PM564-RP-AC: 4.8 W PM564-RP-ETH-AC: 5.3 W |
| Processor module interfaces | I/O bus, COM1, COM2 (optional), ETHERNET (depending on model) | |
| Connection system | see System Assembly, Construction and Connection AC500-eCo | |
| Weight | PM554-TP: 300 g PM554-TP-ETH: 300 g PM554-RP: 350 g PM556-TP-ETH: 300 g PM564-TP: 300 g PM564-TP-ETH: 300 g PM564-RP: 350 g PM564-RP-ETH: 350 g PM566-TP-ETH: 300 g |
PM554-RP-AC: 400 g PM564-RP-AC: 400 g PM564-RP-ETH-AC: 400 g |
| Mounting position | horizontal or vertical | |
*) These values show the value of the apparent current (sum of active and reactive current)
Detailed Data
| Program memory | 128 kB Flash EPROM (PM554-xP and PM564-xP types) 512 kB Flash EPROM (PM556-xP and PM566-xP types) |
| Data memory | |
| - VAR data | 10 kB |
| - VAR_RETAIN data | 1 kB, always buffered in flash |
| - %RB data (persistent) | 1 kB, can be buffered in flash (depending on configuration) |
| - %MB data | 2 kB (PM554 and PM564 types) 64 kB (PM556 and PM566 types) |
| Data buffering | In flash memory |
| Real time clock (RTC) | Optional |
| Battery low indication | Warning |
| Programming languages | - Instruction List (IL) - Function Block Diagram (FBD) - Ladder Diagram (LD) - Sequential Function Chart (SFC) - Structured Text (ST) - Continuous Function Chart (CFC) |
| Cycle time for 1000 instructions | |
| Binary | 0.08 ms |
| Word | 0.1 ms |
| Floating point | 1.2 ms |
| Program execution | |
| Cyclic | Yes |
| Time-controlled | Yes |
| Multitasking | Yes |
| Interruption | 1 interrupted with up or down edge detection |
| LEDs | Power, Run, Error, Status of I/Os |
| RUN/STOP switch | Yes |
| Protection of the user program by password | Possible |
| Usable accessories | MC503: Memory card expansion module TA561-RTC: Real time clock expansion module TA562-RS: Serial RS485 expansion module TA562-RS-RTC: Real time clock and serial RS485 expansion module |
Detailed data of the interfaces
| Serial interface COM1 | |
|---|---|
| Physical link | Non-isolated RS-485 |
| Baudrate | Configurable from 1.2 to 187.5 kB/s (CAUTION: The interface can be damaged if the signal exceeds the common mode range.) |
| Connection | 9-pin D-sub jack |
| Common mode range | Typ. -8 V / +12 V |
| Usage | - Programming port - MODBUS (master and slave) - Serial ASCII communication - CS31 (master only) |
| Max. cable length | 50 m (with shielded cable) |
| Serial interface COM2 (optional) | |
|---|---|
| Physical link | Non-isolated RS-485 |
| Baudrate | Configurable from 1.2 to 115.2 kB/s |
| Connection | Removable 5-pin terminal block |
| Common mode range | Typ. -8 V / +12 V |
| Usage | - Programming port - MODBUS (master and slave) - Serial ASCII communication |
| Max. cable length | 50 m (with shielded cable) |
Data of I/Os
| PM55x-xP | PM56x-xP | |
|---|---|---|
| Max. number of I/O modules | 10 | 10 |
| Digital inputs | 320 + 8 | 320 + 8 |
| Digital outputs | 240 + 6 | 240 + 6 |
| Type of digital outputs | PM554-TP PM554-TP-ETH PM554-RP PM554-RP-AC PM556-TP-ETH PM564-TP PM564-TP-ETH PM564-RP PM564-RP-AC PM564-RP-ETH PM564-RP-ETH-AC PM566-TP-ETH |
Transistor Transistor Relays Relays Transistor Transistor Transistor Relays Relays Relays Relays Transistor |
| Analog inputs | 160 | 160 + 2 |
| Analog outputs | 160 | 160 + 1 |
| Number of decentralized inputs and outputs | On CS31 Bus: up to 31 stations with up to 120 digital inputs / 120 digital outputs each | |
| Detailed data of the onboard I/O | Onboard I/Os in PM55x and Onboard I/Os in PM56x Onboard I/Os in Processor Module PM55x Onboard I/Os in Processor Module PM56x | |
No effects of multiple overloads
No effects of multiple overloads on isolated multi-channel modules occur, as every channel is protected individually by an external fuse.