Channel \ Parameters for the Analog Outputs (2x)

Name	Value	Internal value	Internal value, type	Default
Output 0, channel configuration	see 3)	see 3)	BYTE	0
Output 0, check channel	see 4)	see 4)	BYTE	0
Output 0, substitute value	see 5)	see 5)	WORD	0
Output 1, channel configuration	see 3)	see 3)	BYTE	0
Output 1, check channel	see 4)	see 4)	BYTE	0
Output 1, substitute value	see 5)	see 5)	WORD	0

Channel Configuration ³)

Internal value	Operating modes of the analog outputs, individually configurable
0	Not used (default)
128	-10 V…+10 V
129	0…20 mA
130	4…20 mA

Channel Monitoring ⁴)

Internal value	Check channel
0	Plausib(ility), cut wire, short circuit
3	None

Substitute Value ⁵)

Intended behaviour of output channel  when the control system stops	Required setting of the module parameter “Behaviour of outputs in case of a communication error”	Required setting of the channel parameter “Substitute value”
Output OFF	Off	0
Last value infinite	Last value	0
Last value for  5 s	Last value 5 s	0
Last value for 10 s	Last value 10 s	0
Substitute value infinite	Substitute value	Depending on configuration
Substitute value for 5 s	Substitute value 5 s	Depending on configuration
Substitute value for 10 s	Substitute value 10 s	Depending on configuration