ETHERNET Networking InterfacesΒΆ
This interface is the connection to a processor module with onboard ETHERNET e.g. PM56xx-2ETH.
Note
TB56xx-2ETH for processor modules PM56xx-2ETH provide 2 independent ETHERNET interfaces.
The two ETHERNET interfaces can be configured as independent interfaces or with switch functionality.
In case of two independent interfaces they must be configured to different subnets.
Note
For structured ETHERNET cabling only use cables according to TIA/EIA-568-A, ISO/IEC 11801 or EN 50173.
Pin assignment
| Interface | Pin | Signal | Description |
|---|---|---|---|
| 1 | TxD+ | Transmit Data + | |
| 2 | TxD- | Transmit Data - | |
| 3 | RxD+ | Receive Data + | |
| 4 | NU | Not used | |
| 5 | NU | Not used | |
| 6 | RxD- | Receive Data - | |
| 7 | NU | Not used | |
| 8 | NU | Not used | |
| Shield | Cable shield | Functional earth |
See supported protocols and used ETHERNET ports for AC500_Product_Name V2 products:: Supported Ethernet Protocols and Ports
See communication via MODBUS for AC500_Product_Name V2 products: : Communication \ with MODBUS TCP/IP
See communication via MODBUS for AC500_Product_Name V2 products: : Communication \ with MODBUS RTU
See supported protocols and used ETHERNET ports for AC500_Product_Name V3 products:: ETHERNET Protocols and Ports for AC500 V3 Products
See communication via MODBUS for AC500_Product_Name V3 products: : Communication \ with MODBUS TCP/IP
See communication via MODBUS for AC500_Product_Name V3 products: : Communication \ with MODBUS RTU