Configuration of the IP Settings with IP Configuration Tool

With the IP configuration tool a network scan can be executed.

Further, the IP settings of found PLC devices can be changed if required.

1. From the menu, select Tools ‣ IP-Configuration.

2. Click Scan to trigger the scan process for devices in the network.

   ⇒

   A progress bar shows the progress.

3. To change the configured IP settings, select a connected device from the list.

   ⇒

   The IP settings are displayed below the list and can be edited.

4. Click Save Configuration to transmit the IP settings to the corresponding device.

Note

For Processor Modules with 2 onboard ETHERNET interfaces it is recommended to configure only 1 interface as default gateway.