Communication Modules (CM5xx)

For a Processor Module with Communication Module devices, the Communication Modules must be specified in Automation_Builder in the same order as they are installed in the AC500 PLC system:

  • Slot 0 corresponds to the Internal Communication Module (installed in the Processor Module’s housing)
  • Slot 1 is the Communication Module installed in the first slot on the left of the Processor Module
  • Slot 2 is the Communication Module installed in the second slot on the left of the Processor Module
  • Slot 3 is the Communication Module installed in the third slot on the left of the Processor Module
  • Slot 4 is the Communication Module installed in the fourth slot on the left of the Processor Module

The allocation of inputs/outputs for the Communication Modules is done slot-oriented and independent of the Communication Module type.

To append a Communication Module, add the Communication Module to the Extension_Bus node.

  1. Right-click the desired Slot and select Add object.

  2. Select the Communication Module from the list and click Replace object.

  3. In the device tree, double-click the Communication Module node and configure the parameters according to the selected Communication Module.