Connect the wire to the spring terminalΒΆ

../_images/c87c9583a3989ae20a3313902da71ac21

Connect the wire to the spring terminal (steps 1 to 3)

../_images/7644f394a39a2ee60a3313901294ce3b1

Connect the wire to the spring terminal (steps 4 to 7)

  1. Side view (open terminal drawn for illustration)

  2. The top view shows the openings for wire and screwdriver

  3. Insert screwdriver (2.5 x 0.4 to 3.5 x 0.5 mm) at an angle, screwdriver must be at least 15 mm free of insulation at the tip

  4. While erecting the screwdriver, insert it until the stop (requires a little strength)

  5. Screwdriver inserted - terminal open

  6. Strip the wire for 7 mm (and put on wire end ferrule)

  7. Insert wire into the open terminal

  8. Remove the screwdriver

  9. Done