Disconnect wire from the spring terminalΒΆ

../_images/1778a273a39bf6770a3313904769b20d1

Disconnect wire from the spring terminal (steps 1 to 3)

../_images/5313bda0a39d41b90a3313902197cff61

Disconnect wire from the spring terminal (steps 4 to 6)

  1. Terminal with wire connected

  2. Insert screwdriver (2.5 x 0.4 to 3.5 x 0.5 mm) at an angle, screwdriver must be at least 15 mm free of insulation at the tip

  3. While erecting the screwdriver, insert it until the stop (requires a little strength) - terminal is now open

  4. Remove wire from the open terminal

  5. Remove the screwdriver

  6. Done