Parameterization¶
The arrangement of the parameter data is performed with Control Builder Plus software.
The parameter data directly influences the functionality of modules.
For non-standard applications, it is necessary to adapt the parameters to your system configuration.
| Name | Value | Internal Value | Internal Value, Type | Default | Min. | Max. | EDS Slot Index |
|---|---|---|---|---|---|---|---|
| Module ID | Internal | 6140 *1) | WORD | 6140 0x17FC |
0 | 65535 | xx01 |
| Ignore module | No Yes |
0 1 |
BYTE | No (0x00) |
|||
| Parameter length | Internal | 1 | BYTE | 0 | 0 | 255 | xx02 *2) |
| Check supply | Off On |
0 1 |
BYTE | On 0x01 |
*1) with CS31 and addresses less than 70, the value is increased by 1
*2) Value is hexadecimal: HighByte is slot (xx: 0 … 7), LowByte is index (1 … n)
| GSD file: | Ext_User_Prm_Data_Len = Ext_User_Prm_Data_Const(0) =
|
0x04 0xFD, 0x17, 0x00,\ 0x01; |