Configuration of FTP Server (>= CBP 2.4)\ \ \

1. Under Ethernet -> Protocols add a new object and select FTP Server from the list.

2. Double-click the FTP_Server item to open FTP server configuration:

   ⇒

   

Parameter		Default	Value	Description
Configuration for		ETH1	ETH1/ETH2	Select the desired Ethernet connection used for FTP server.
FTP Server
	Allow Firmware update	Disabled	Enabled	CBP firmware is not updated automatically. You can download a PLC firmware to the ramdisk and the PLC will automatically update the device with the downloaded firmware. Afterwards a restart of the PLC is required. For further details see FW_UPDATE_DOCUMENTATION.
			Disabled	CBP firmware is updated automatically.
	Port	21	1…x	Enter the TCP/IP-Port used to connect to the FTP-Server on the PLC.
	Sessions	1	1…4	Enter the max. number of allowed simultaneous and parallel connections to the FTP-server. Each session uses one socket. Note: Some FTP clients require several connections to work.
Passwords		-	-	Set each user’s passwords for login. No entry = no password.
	root
	ramdisk			The system ramdisk should only be used for firmware updates.
	sdcard
	userdisk
	sramdisk

1. Create configuration & download project to PLC.

2. If the TCP protocol listens on the configured FTP port, the server is ready for login.

   ⇒