ReplacementΒΆ

Replacement of the Battery

Note

In order to avoid any data losses (if needed), the battery replacement should be done with the system under power. Without battery and power supply there is no data buffering possible.

  1. Open the battery compartment with the small locking mechanism, press it down and slip down the door. The door is attached to the front face of the Processor Module and cannot be removed.

  2. Remove the old TA521 battery from the battery compartment by pulling it by the small cable. Remove then the small connector from the socket, do this best by lifting it out with a screwdriver.

    0d0d9c66e38798bd0a33139000473a6a_e6a4e08866f857ac0a3313900a7df0f0

  3. Follow the previous instructions to insert a new battery.

Caution

:strong:Risk of explosion!

Do not open, re-charge or disassemble a lithium battery. Attempts to charge lithium batteries lead to overheating and possible explosions.

Prevent them from heat and fire and store them in a dry place.

Never short-circuit or operate lithium batteries with the polarities reversed. The batteries are likely to overheat and explode. Avoid chance short circuiting and therefore do not store batteries in metal containers and do not place them on metallic surfaces. Escaping lithium is a health hazard.