Insertion¶
Insertion of the Lithium battery
Open the battery compartment with the small locking mechanism, press it down and slip down the door. The door is attached to the front face of the Processor Module and cannot be removed.
Remove the TA521 battery from its package and hold it by the small cable.
Insert the battery connector into the small connector port of the compartment. The connector is keyed to find the correct polarity (red = plus-pole = above).
Insert first the cable and then the battery into the compartment, push it until it reaches the bottom of the compartment.
Arrange the cable in order not to inhibit the door to close.
Pull-up the door and press until the locking mechanism snaps.
Note
In order to prevent data losses or problems, the battery should be replaced after 3 years of utilisation or at least as soon as possible after receiving the “low battery warning” indication.
Do not use a battery older than 3 years for replacement, do not keep batteries too long in stock.