FBP Terminal Units TU505-FBP and TU506-FBP for FBP Interface Modules\¶
- TU505-FBP, FBP Terminal Unit, Screw-type Terminals
- TU506-FBP, FBP Terminal Unit, Spring Terminals
FBP Terminal Unit TU506-FBP, for FBP Interface Modules
| Elements of the FBP Terminal Units | |
|---|---|
| 1 | I/O-Bus (10-pole female) to electrically connect the first I/O Terminal Unit |
| 2 | Plug (1x 50-pole and 2x 38-pole) to electrically connect the inserted FBP Bus Module |
| 3 | With a screwdriver, inserted in this place, the FBP Terminal Unit and the adjacent I/O Terminal Unit can be shoved from each other |
| 4 | 2 holes for wall mounting |
| 5 | 20 screw-type or spring terminals for signals and power supply voltage |
| 6 | Neutral FieldBusPlug Interface |
| 7 | DIN rail |
| Screw-type terminals (TU505-FBP) | Spring terminals (TU506-FBP) | ||||
| Conductor | Screwdriver | Conductor | Screwdriver (opens terminal) |
Figure: Types of terminals
The FBP Terminal Units TU505-FBP (with screw-type terminals) and TU506-FBP (with spring terminals) are specifically designed for use with AC500/S500 FBP Interface Modules (e.g. DC505-FBP).
The FBP Interface Modules plug into the FBP Terminal Unit. When properly seated, they are secured with two mechanical locks. All the electrical connections are made through the FBP Terminal Unit, which allows removal and replacement of the FBP Interface Modules without disturbing the wiring at the FBP Terminal Unit.
Note
Note: Mounting, disassembling and electrical connection for the Terminal Units and the I/O modules are described in detail in Mounting and disassembling the Terminal Units and the I/O modules Mounting and Disassembling the Terminal Units and the I/O Modules.
The terminals 1.8 to 2.8 and 1.9 to 2.9 are electrically interconnected within the FBP Terminal Unit and have always the same assignment, independent of the inserted module:
- Terminals 1.8 to 2.8: Process voltage UP = +24 V DC
- Terminals 1.9 to 2.9: Process voltage ZP = 0 V
The assignment of the other terminals is dependent on the inserted FBP Interface Module (see Overview of FBP Interface Modules S500 FBP Interface Modules Overview).
The supply voltage 24 V DC for the module’s electronic circuitry comes from the FieldBusPlug. If the FieldBusPlug is removed, the FBP Interface Module has no supply voltage. Also, all I/O expansion modules connected through the I/O-Bus have no supply for their electronic parts then.