TK502 - Programming Cable

• PC side: SUB-D, 9-pole, female
• AC500 side: terminal block, 9-pole, female
• Length: 5 m

Programming cable TK502

Purpose

The TK502 cable connects a 9-pole serial COM interface of a PC with the serial COM1 interface of PM57x, PM58x and PM59x. It is used for programming purposes.

Note

With AC500/AC500-eCo Processor Modules, only the ABB programming cables TK50x can be used. Other cables may cause communication faults and must not be used.

Electrical Connection

The 2 plugs are put on the two COM interfaces and the plug at the PC side is tightened then.

Technical Data

The System Data of AC500 and S500 System Data AC500 are valid here. Only additional details are therefore documented below.

Connector at the PC (COM interface)	SUB-D, 9-pole, female
Connector at the AC500 CPU (COM1)	terminal block, 9-pole, female
Cable length	5 m
Cable type	LiYCY 5 x 0,14 mm², shielded
Weight	220 g

Ordering Data

Order No.	Scope of delivery
1SAP 180 200 R0101	TK502, programming cable terminal block / SUB-D, length: 5 m