| Number of channels |
2 |
| Reference potential for all outputs |
Terminals 1.9…4.9 (minus pole of the process supply voltage, signal name ZP) |
| Common power supply voltage |
For all outputs: terminals 1.8…4.8 (plus pole of the process supply voltage, signal name UP) |
| Output voltage for signal 0 |
≤ 1.5 V at 10 mA |
| Output delay (0->1 or 1->0) |
Typ. 0.3 µs |
| Output current |
≤ 10 mA |
| Switching frequency |
< 1 Mhz (depending on firmware) |
| Short-circuit proof / overload proof |
Yes |
| Output current limitation |
Yes, automatic reactivation after short-circuit/overload |
| Resistance to feedback against 24V signals |
Yes |
| Resistance to feedback against reverse polarity |
No |
| Max. cable length (shielded) |
Typ. 12.5 m @ 500 kHz (depending on sensor) |
