Technical data of the fast outputs O0 and O1

Number of channels	2
Reference potential for all outputs	Terminals 1.9…4.9  (minus pole of the process supply voltage, signal name ZP)
Common power supply voltage	For all outputs: terminals 1.8…4.8 (plus pole of the process supply voltage, signal name UP)
Indication of the output signals	Brightness of the LED depends on the number of pulses emitted (0 % to 100 %) (pulse output mode only)
Output voltage for signal 1	UP (-0.1 V)
Output voltage for signal 0	ZP (+0.3 V)
Output delay (0->1 or 1->0)	Typ. 1 µs
Output current
Rated value, per channel	100 mA at UP = 24 V
Maximum value (all channels together, configurable outputs included))	8 A
Leakage current with signal 0	< 0.5 mA
Rated protection fuse on UP	10 A fast
De-magnetization when inductive loads are switched off	With varistors integrated in the module (see figure above)
Switching frequency	PWM: up to 100 kHz (min. step for PWM value: 2 µs) Pulse: up to 15 kHz
Short-circuit proof / overload proof	Yes
Overload message (I > 0.1x A)	Yes, after ca. 100 ms
Output current limitation	Yes, automatic reactivation after short-circuit/overload
Resistance to feedback against 24V signals	Yes
Resistance to feedback against reverse polarity	No
Max. cable length
Shielded	1000 m
Unshielded	600 m