ReplacementΒΆ

Note

For PM595-4ETH-F only: battery replacement should be done with the system under power. Without battery and power supply there is no data buffering possible.

For PM595-4ETH-M-XC only: battery only back-ups the real-time clock.

  1. Remove the front cover / display by pressing the marked areas and pull it to the front.

  2. Remove the old battery from the battery compartment by pulling it by the small cable. Remove then the small connector from the socket, do this best by lifting it out with a screwdriver.

    Follow the previous instructions to insert a new battery.

Caution

:strong:Risk of explosion!

Do not open, re-charge or disassemble a lithium battery. Attempts to charge lithium batteries lead to overheating and possible explosions.

Prevent them from heat and fire and store them in a dry place.

Never short-circuit or operate lithium batteries with the polarities reversed. The batteries are likely to overheat and explode. Avoid chance short circuiting and therefore do not store batteries in metal containers and do not place them on metallic surfaces. Escaping lithium is a health hazard.