Technical Data of the \ Analog Inputs

Number of channels per module	2 voltage inputs
Distribution of channels into groups	1 group for 2 channels
Electrical isolation	None
Power Supply Voltage	Via the L+ and the M terminal of the processor module power supply
Resolution	Voltage 0 … 10 V DC: 10 bits
Connection of the signals AI0 and AI1	Terminals 8 and 9
Input type	Unipolar
Data word format
Unipolar, full-scale range	0 to 27648
Indication of the input signals	No
Channel input resistance	Voltage: >100 kΩ
Accuracy
Typical (25 °C)	±1 %
Worst case (at 0 … 60 °C or EMC disturbances)	±2.5 % of full-scale
Time constant of the input filter	Typ. 1 ms
Relationship between input signal and hex code	Onboard I/Os in Processor Module PM56x
Analog to digital conversion time	On request
Unused inputs	Can be left open and should be configured as “unused”
Overvoltage protection	Yes, up to 30 V DC
Max. cable length (conductor cross section > 0,14 mm )
Unshielded wire	On request
Shielded wire	100 m