Technical Data of the Relay Outputs

Number of channels per module	8 relay outputs
Distribution of channels into groups	8 groups of 1 channel each
Connection of the channel R0	terminal 2.0 (common), 3.0 (NO) and 4.0 (NC)
Connection of the channel R1	terminal 2.1 (common), 3.1 (NO) and 4.1 (NC)
:	:
Connection of the channel R6	terminal 2.6 (common), 3.6 (NO) and 4.6 (NC)
Connection of the channel R7	terminal 2.7 (common), 3.7 (NO) and 4.7 (NC)
Electrical isolation	between the channels and from the rest of the module
Indication of the output signals	one yellow LED per channel, the LED is ON when the relay coil is energized
Output delay (0->1 or 1->0)	on request
Relay power supply	by UP process voltage
Relay outputs
output short-circuit protection	should be provided externally with a fuse or circuit breaker
rated protection fuse	6 A gL/gG per channel
Output switching capacity
resistive load, max.	3 A; 3 A (230 V AC), 2 A (24 V DC)
inductive load, max.	1.5 A; 1.5 A (230 V AC), 1.5 A (24 V DC)
lamp load	60 W (230 V AC), 10 W (24 V DC)
Output switching capacity (XC version above 60 °C)	On Request
Life time (cycles)	mechanical: 300 000; under load: 300 000 (24 V DC at 2 A), 200 000 (120 V AC at 2 A), 100 000 (230 V AC at 3 A)
Spark suppression with inductive AC load	must be performed externally according to driven load specifications
Demagnetization with inductive DC load	a free-wheeling diode must be circuited in parallel to the inductive load
Switching frequency
with resistive load	max. 10 Hz
with inductive load	max. 2 Hz
with lamp load	max. xx Hz
Max. cable length
shielded	1000 m
unshielded	600 m