LED_SET¶
| Parameter | Value |
|---|---|
| Library_File_Name | SysIntExt_AC500_V13.lib |
| Firmware | V1.3.0 |
| Type | Type_Function_Block_History |
| Group | LED |
This Function Block is used to control the LED modes of the CM574-RS. Using this Function Block it is possible to access each LED on the CM574-RS and to change its blinking period.
Each LED has to be controlled individually:
LED number: 0 : Power LED
1 : RUN LED
2 : ERROR LED
3 : COM1 Status LED
4 : COM2 Status LED
5 : READY LED
6 : STAT LED
If the LED should be controlled by the runtime system again, just switch the MODE back to 0. (MODE 0 = runtime system , MODE 1 = user program).
Note
In order to enable activation of the Error LED from the user program, set the “Error LED” parameter to “Off”.