Input DescriptionΒΆ
EN
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| BOOL | - | - | - |
A rising edge at input EN initiates the Function Block. The signal TRUE must be applied until the Function Block is processed completely.
SLOT
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| BYTE | - | - | - |
Input SLOT specifies the module number of the CM574-RCOM Communication Module used to execute the Function Block.
The external slots are numbered consecutively from right to left, starting with number 1.
NODE
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| WORD | - | - | - |
Input NODE specifies the number of the slave. The value 255 sets all slaves to the same time (all slaves are called).
ID
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| WORD | - | - | - |
Input ID specifies the number of the data record to be read.
DATA
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| DWORD | - | - | - |
Input DATA specifies the first flag of the flag area where the data should be stored.