Terminals at the Terminal Unit

../_images/007f5ce9a39636280a33139052e9f9131

Terminal type: Screw-type terminal

Type Front terminal, conductor connection vertically with respect to the printed circuit board
Degree of protection IP 20
Stripped conductor end 9 mm, min. 8 mm
Fastening torque 0.6 Nm
Needed tool Slotted screwdriver
Dimensions Blade diameter 3.5 mm

Terminal Units with Product Index < C0 e. g. 1SAP 212 200 R0001 B0

Number of cores per terminal Conductor type Cross section  
1 Solid 0.08 mm² to 2.5 mm²  
1 Flexible 0.08 mm² to 2.5 mm²  
1 with wire end ferrule Flexible 0.25 mm² to 1.5 mm²  
   
2 Solid Not intended  
2 Flexible Not intended  
2 with TWIN wire end ferrule (length 10 mm) with plastic sleeve Flexible 2 x 0.25 mm² or 2 x 0.5 mm² or 2 x 0.75 mm², with square cross-section of the wire-end ferrule also 2 x 1.0 mm²  

Terminal Units with Product Index >= C0 , e. g. 1SAP 212 200 R0001 C0

Number of cores per terminal Conductor type Cross section  
1 Solid 0.08 mm² to 2.5 mm²  
1 Flexible 0.08 mm² to 2.5 mm²  
1 with wire end ferrule without plastic sleeve Flexible 0.08 mm² to 2.5 mm²  
1 with wire end ferrule with plastic sleeve Flexible 0.14 mm² to 1.5 mm²  
   
2 Solid 0.08 mm² to 1.5 mm²  
2 Flexible 0.08 mm² to 1.5 mm²  
2 with TWIN wire end ferrule (length 10 mm) with plastic sleeve Flexible 2 x 0.5 mm² to 2 x 1.0 mm²  
2 with separate wire end ferrule without plastic sleeve Flexible 0.08 mm² to 0.75 mm²  

Terminal type: Spring \ terminal

Type Front terminal, conductor connection vertically with respect to the printed circuit board
Degree of protection IP 20
Stripped conductor end 9 mm, min. 8 mm
Needed tool Slotted screwdriver
Dimensions 2.5 x 0.4 to 3.5 x 0.5 mm, screwdriver must be at least 15 mm free of insulation at the tip
Number of cores per terminal Conductor type Cross section
1 Solid 0.08 mm² to 2.5 mm²
1 Flexible 0.08 mm² to 2.5 mm²
1 with wire end ferrule Flexible 0.25 mm² to 1.5 mm²
     
2 Solid Not intended
2 Flexible Not intended
2 with TWIN wire end ferrule (length 10 mm) with plastic sleeve Flexible 2 x 0.25 mm² or 2 x 0.5 mm² or 2 x 0.75 mm², with square cross-section of the wire-end ferrule also 2 x 1.0 mm²