Parameterization¶
The arrangement of the parameter data is performed with Control Builder Plus software.
The parameter data directly influences the functionality of modules.
For non-standard applications, it is necessary to adapt the parameters to your system configuration.
| Name | Value | Internal Value |
Internal value, Type |
Default | Min. | Max. | EDS Slot Index |
|---|---|---|---|---|---|---|---|
| Module ID | Intern | 6505 *1) | WORD | 0x1969 | 0 | 65535 | xx01 |
| Ignore module | No Yes |
0 1 |
BYTE | No 0x00 |
|||
| Parameter length | Intern | 4 | BYTE | 0 | 0 | 255 | xx02 *2) |
| Check Supply | Off On |
0 1 |
BYTE | On 0x01 |
|||
| Analog Data Format | Default | 0 | BYTE | Default 0x00 |
255 |
*1) with CS31 and addresses less than 70, the value is increased by 1
*2) Value is hexadecimal: HighByte is slot (xx: 0 … 7), LowByte is index (1 … n)
| GSD file: | Ext_User_Prm_Data_Len = Ext_User_Prm_Data_Const(0) = |
0x07 0x6A, 0x19, 0x04, \ 0x01, 0x00, \ 0x00, 0x00; |