Output Description

DONE   BOOL \   (done)

The output variable DONE shows the processing state of the Function Block. It shows TRUE when the processing ended or an error took place. This variable DONE should be checked together with the variable ERR. If DONE and ERR are set to TRUE then the output ERNO should be checked to see which error occurred.

ERR   BOOL \   (error)

ERR shows TRUE if the Function Block was terminated as a consequence of an error, or FALSE if it ended normally.

ERNO

Data_Type	Default_Value	Range	Unit
WORD	-	0 … 65535	-

At output ERNO the identifier of an occurred error is provided. It is only valid when DONE and ERR is TRUE. (see, error messages): Error Messages of the Function Block Libraries

RDY   BOOL \   (ready)

A command has been received if RDY = TRUE.

OUT   REAL \    (output)

The output OUT gives the received value as a floating point number.

The output always has to be considered together with output RDY.

TIMESTAMP_VALID   BOOL \    (timestampvalid)

Valid timestamp was received when the output is TRUE.

The output always has to be considered together with output RDY.

TIMESTAMP   DT \    (timestamp)

If data with timestamp is received, the timestamp is given at this output.

The value is given if a valid timestamp was received and the output VALID_TIMESTAMP = TRUE.

MSEC   WORD \    (milliseconds)

Value of the received timestamp in milliseconds. The value is given if a valid timestamp was received and the output VALID_TIMESTAMP = TRUE.

SQ   BYTE \   (sequence)

Output SQ displays the sequence number.

The output always has to be considered together with output RDY.

IV   BOOL \   (invalid)

Output IV displays the status/information of the data. If IV = TRUE, the data is invalid.

The output always has to be considered together with output RDY.

CA   BOOL \   (counter \ adjusted)

Output CA displays the status/information of the data. If CA = TRUE, the counter has been preset since the last reading.

The output always has to be considered together with output RDY.

CY   BOOL \   (carry)

Output CY displays the status/informations of the data. If CY = TRUE, the transmission divided into associated measurement periods.

The output always has to be considered together with output RDY.

REASON   BYTE \   (reason)

Output REASON displays the cause of the transmission.

The output always has to be considered together with output RDY.

Reasons for transmission:

1	Periodic/cyclic
2	Background interrogation
3	Spontaneous
4	Initialised
5	Requested
6	Activation
7	Confirmation of activation
8	Deactivation
9	Confirmation of deactivation
10	Termination of activation
11	Return information, caused by a remote command
12	Return information, caused by a local command
20	Interrogated by general inquiry

OV   BOOL \    (overrun)

Overrun was detected if the output OV = TRUE.

The output OV indicates by changing from FALSE to TRUE, that the transmission requests are coming too fast, i.e. the task cycle time is configured as too fast.

The output always has to be considered together with output RDY.