MODBUS TCP

The following hardware components must be available:

• AC500 or AC500-eCo with ETHERNET option
• Drive with FENA-01 or FENA-11 or RETA-01 or RETA-02 Realtime ETHERNET Communication Module
• ETHERNET cable with RJ45 plugs

The following libraries have to be loaded into the project:

• ACSDrivesBase_AC500_V20.lib ACS Drives Base Library

• In case the Firmware is less then V2.4 and CPU has only one ETHERNET Interface:

  ACSDrivesComModTCP_AC500_V22.lib ACS / DCS Drives Communication via MODBUS TCP Library

• In case the CPU has two ETHERNET Interfaces e.g. PM595 or PM591-2ETH and at least with Firmware V2.4. ACS_COM_MOD_TCP Communication for ACS / DCS Drives via MODBUS TCP

Question:Which ACSxxx drive should be used?

• ACS355 System Technology
• ACS550 or ACH550 System Technology
• ACS580 System Technology
• ACS800 System Technology
• ACS850, ACQ810 or ACSM1 System Technology
• ACS880 System Technology
• DCS800 or DCS550 System Technology

• ACS355 with MODBUS TCP
• ACS550 or ACH550 with MODBUS TCP
• ACS580 with MODBUS TCP
• ACS800 with MODBUS TCP
• ACS850, ACQ810 or ACSM1 with MODBUS TCP
• ACS880 with MODBUS TCP
• DCS800 or DCS550 with MODBUS TCP