ACS_COM_MOD_RTU_GEN_VISU_PH Visualization Faceplate for the Function Block ACS_COM_MOD_RTU_GEN\ΒΆ
Visualization offline / online mode
Visualization element ACS_COM_MOD_RTU_GEN_VISU_PH can be used to show the actual values of all inputs and outputs of the instance of an ACS_COM_MOD_RTU_GEN ACS_COM_MOD_RTU_GEN Communication for Generic Devices via MODBUS RTU Function Block which instance is used to replace the placeholder $FB$.
The visualization can also be used to control the Function Block by those inputs which are not connected inside the program.
Visualization Data
| Available as of PLC runtime system: | V1.3.2 |
| Included in library: | ACSDrivesComModRTU_AC500_V20.lib |
Description
Visualization element ACS_COM_MOD_RTU_GEN_VISU_PH can be used to show the actual values of all inputs and outputs of the instance of an ACS_COM_MOD_RTU_GEN Function Block, which instance was used to replace the placeholder $FB$.
All inputs of that ACS_COM_MOD_RTU_GEN Function Block, which are not connected to a variable (left open) can be written from this visualization faceplate. So the Function Block can be controlled from the visualization as long as the inputs are left open.
Even if most of the inputs should not be change while the program is running (COM, SLAVE and TIMEOUT), the visualization is nevertheless helpful to check the ONLINE state and additional internal variables about error count and last error numbers.
The SLAVE_DATA variable must be connected to the Function Block.