HA_CS31_DIAG_VISU_PH - Visualization

Description

Visualization element HA_CS31_DIAG_VISU_PH can be used to show the actual values of all inputs and outputs of the instance of HA_CS31_DIAG function block. The visualization can also be used to control the function block by those inputs which are not connected inside the program.

The following picture describes visualization in offline and online mode:

HA_CS31_DIAG_VISU_PH_offline

HA_CS31_DIAG_VISU_PH_online

Colors

The color of the variables has the following meaning:

• White: Actual FALSE and should be FALSE in normal operation.
• Green: Actual TRUE and should be TRUE in normal operation.
• Yellow: Actual FALSE but should be TRUE in normal operation.
• Red: Actual TRUE but should be FALSE in normal operation

Visualization Parameters

Variable	Access	Description *)
EN	R	To enable the function block with value TRUE.
COM	R	COM port number of CS31 master.
DONE	R	Execution finished when output DONE=TRUE.
ERR	R	Error occurred during execution when output ERR=TRUE.
ERNO	R	Error code.
NUM_SLV_CFG	R	Number of configured CI590-CS31-HA slave modules on COM.
NUM_SLV_ACT	R	Number of CI590-CS31-HA active slave modules on CS31 Bus.
ACTIVE_SLV	R	Each bit of the DWORD indicates the active CI590-CS31-HA slave modules.
ERR_MIX_WIRING	R	Error bit indicating mix wiring between Bus 1 and Bus 2.

*) all elements refer to the function block instance replaced for the placeholder $FB$.

All inputs of the HA_CS31_ DIAG function block which are not connected to a variable (left open) can be written from this visualization faceplate. So the function block can be controlled from the visualization as long as the inputs are left open. Background color can be changed by writing a value to the global variable dwAcsVisuBackgroundColor. Title color can be changed by writing a value to the global variable dwAcsVisuTitleColor.