Introduction¶
Safety Instructions
Consider the following before using the libraries:
- All pertinent state, regional, and local safety regulations must be observed when installing and using this product. When functions or devices are used for applications with technical safety requirements, the relevant instructions must be followed.
- Read the complete safety instructions of the user’s manuals for the drives you are using, before installation and commissioning.
- Read all safety instructions: Safety Instructions
- Read the user information of the devices and functions you are using, see Automation_Builder online help.
Preconditions: HA-CS31 Library
The library package has been released for the software and firmware versions listed in the Readme file of Automation_Builder only (see ) .
In no event will ABB or its representatives be liable for loss of data, profits, revenue or consequential, incidental or other damage that may result from the use of other versions of product, software or firmware versions. The error-free operation of the HA library with other devices, software or firmware versions should be possible but cannot be guaranteed and may need adaptations e.g. of example programs.
Caution
Generally, the user in all applications is fully and alone responsible for checking all functions carefully, especially for safe and reliable operation.
Note
The function blocks contained in the library can be executed only in RUN mode of the PLC, but not in simulation mode.