Preconditions for the Use of the ACS / DCS Drives Read / Write Parameter via PROFINET Library

Note

The Function Blocks contained in the library can only be executed in RUN mode of the PLC, but not in simulation mode.

The blocks can only be used in combination with the ACSDrivesBase_AC500_V20 Library.

The library is released for the following products:

• CPUs: AC500

• Fieldbus: PROFINET

• Drives: ACS800, ACSM1, ACS355, ACS550, ACH550, ACQ810, ACS850, ACS880, ACS580, DCS550, DCS800

• PROFINET configuration:

  Prior to the use of the Function Blocks, PROFINET Communication Module has to be configured accordingly using Automation Builder, at “Interfaces”.

Note

If multiple ACS_PN_READ_N_PRM_DPV1 and / or multiple ACS_PN_WRITE_N_PRM_DPV1 Functions Blocks are enabled at the same time, it may cause an READ / WRITE error.