ETHERNET Communication Module Errors¶
E1..E4 | d1 | d2 | d3 | d4 | Identifier 000…063 | AC500 display | ||
---|---|---|---|---|---|---|---|---|
Class | Comp | Dev | Mod | Ch | Err | PS501 PLC browser | ||
Class | Interface | Device | Module | Channel | Error identifier | Error message | Remedy | |
ETHERNET Communication Module errors | ||||||||
IP task (task 7) errors, see remark 1) | ||||||||
3 | 1..4/10 | 255 | 12 | 3 | 2 | 32hex = 50dec No TCP task initialized | ||
3 | 1..4/10 | 255 | 12 | 3 | 3 | 33hex = 51dec Error when initializing the task configuration | ||
3 | 1..4/10 | 255 | 12 | 3 | 4 | 34hex = 52dec No ETHERNET address | ||
3 | 1..4/10 | 255 | 12 | 3 | 5 | 35hex = 53dec Wait for warm start | ||
3 | 1..4/10 | 255 | 12 | 3 | 6 | 36hex = 54dec Invalid flags | ||
3 | 1..4/10 | 255 | 12 | 3 | 7 | 37hex = 55dec Invalid IP address | ||
3 | 1..4/10 | 255 | 12 | 3 | 8 | 38hex = 56dec Invalid net mask | ||
3 | 1..4/10 | 255 | 12 | 3 | 9 | 39hex = 57dec Invalid gateway | ||
3 | 1..4/10 | 255 | 12 | 3 | 11 | 3Bhex = 59dec Unknown hardware | ||
3 | 1..4/10 | 255 | 12 | 3 | 12 | 3Chex = 60dec No IP address | ||
3 | 1..4/10 | 255 | 12 | 3 | 13 | 3Dhex = 61dec Error initializing the driver | ||
3 | 1..4/10 | 255 | 12 | 3 | 14 | 3Ehex = 62dec No IP address configuration | ||
3 | 1..4/10 | 255 | 12 | 3 | 15 | 3Fhex = 63dec Invalid serial number | ||
3 | 1..4/10 | 255 | 12 | 4 | 0 | 40hex = 64dec No memory on chip | ||
3 | 1..4/10 | 255 | 12 | 6 | 14 | 6Ehex = 110dec Timeout | ||
3 | 1..4/10 | 255 | 12 | 6 | 15 | 6Fhex = 111dec Timeout invalid | ||
3 | 1..4/10 | 255 | 12 | 7 | 3 | 73hex = 115dec Target not reachable | ||
3 | 1..4/10 | 255 | 12 | 7 | 6 | 76hex = 118dec IP address invalid | ||
3 | 1..4/10 | 255 | 12 | 7 | 12 | 7Chex = 124dec ETHERNET address invalid | ||
3 | 1..4/10 | 255 | 12 | 8 | 2 | 82hex = 130dec Unknown mode | ||
3 | 1..4/10 | 255 | 12 | 8 | 3 | 83hex = 131dec ARP cache full | ||
3 | 1..4/10 | 255 | 12 | 8 | 6 | 86hex = 134dec No ARP entry found | ||
3 | 1..4/10 | 255 | 12 | 9 | 5 | 95hex = 149dec Unexpected response | ||
TCP/UDP task (task 6) errors, see remark 1) | ||||||||
3 | 1..4/10 | 255 | 11 | 3 | 2 | 32hex = 50dec Init of IP task not completed | ||
3 | 1..4/10 | 255 | 11 | 3 | 3 | 33hex = 51dec Error when initializing the task configuration | ||
3 | 1..4/10 | 255 | 11 | 3 | 4 | 34hex = 52dec Init of IP task failed | ||
3 | 1..4/10 | 255 | 11 | 3 | 7 | 37hex = 55dec No memory available for init | ||
3 | 1..4/10 | 255 | 11 | 6 | 14 | 6Ehex = 110dec Timeout | ||
3 | 1..4/10 | 255 | 11 | 6 | 15 | 6Fhex = 111dec Invalid timeout | ||
3 | 1..4/10 | 255 | 11 | 7 | 0 | 70hex = 112dec Invalid socket | ||
3 | 1..4/10 | 255 | 11 | 7 | 1 | 71hex = 113dec Socket status | ||
3 | 1..4/10 | 255 | 11 | 7 | 3 | 73hex = 115dec Target not reachable | ||
3 | 1..4/10 | 255 | 11 | 7 | 4 | 74hex = 116dec Option not supported | ||
3 | 1..4/10 | 255 | 11 | 7 | 5 | 75hex = 117dec Invalid parameter | ||
3 | 1..4/10 | 255 | 11 | 7 | 6 | 76hex = 118dec Invalid IP address | ||
3 | 1..4/10 | 255 | 11 | 7 | 7 | 77hex = 119dec Invalid port | ||
3 | 1..4/10 | 255 | 11 | 7 | 8 | 78hex = 120dec CONN closed | ||
3 | 1..4/10 | 255 | 11 | 7 | 9 | 79hex = 121dec CONN reset | ||
3 | 1..4/10 | 255 | 11 | 7 | 10 | 7Ahex = 122dec Unknown protocol | ||
3 | 1..4/10 | 255 | 11 | 7 | 11 | 7Bhex = 123dec No sockets | ||
3 | 1..4/10 | 255 | 11 | 8 | 2 | 82hex = 130dec Unknown mode | ||
3 | 1..4/10 | 255 | 11 | 8 | 3 | 83hex = 131dec Max. data length exceeded | ||
3 | 1..4/10 | 255 | 11 | 8 | 4 | 84hex = 132dec Message count exceeded | ||
3 | 1..4/10 | 255 | 11 | 8 | 5 | 85hex = 133dec Max. group exceeded | ||
3 | 1..4/10 | 255 | 11 | 9 | 5 | 95hex = 149dec Unexpected response message | ||
OMB task (MODBUS TCP) errors (task 3), see remark 1) | ||||||||
3 | 1..4/10 | 255 | 8 | 3 | 4 | 34hex = 52dec Invalid configuration data, server connections | ||
3 | 1..4/10 | 255 | 8 | 3 | 5 | 35hex = 53dec Invalid configuration data, task timeout | ||
3 | 1..4/10 | 255 | 8 | 3 | 6 | 36hex = 54dec Invalid configuration data, OMB timeout | ||
3 | 1..4/10 | 255 | 8 | 3 | 7 | 37hex = 55dec Invalid configuration data, mode | ||
3 | 1..4/10 | 255 | 8 | 3 | 8 | 38hex = 56dec Invalid configuration data, send timeout | ||
3 | 1..4/10 | 255 | 8 | 3 | 9 | 39hex = 57dec Invalid configuration data, connect timeout | ||
3 | 1..4/10 | 255 | 8 | 3 | 10 | 3Ahex = 58dec Invalid configuration data, close timeout | ||
3 | 1..4/10 | 255 | 8 | 3 | 11 | 3Bhex = 59dec Invalid configuration data, swap | ||
3 | 1..4/10 | 255 | 8 | 3 | 12 | 3Chex = 60dec TCP_UDP task not found, TCP task not ready | ||
3 | 1..4/10 | 255 | 8 | 3 | 13 | 3Dhex = 61dec PLC task not found, PLC task not ready | ||
3 | 1..4/10 | 255 | 8 | 3 | 14 | 3Ehex = 62dec Error initializing OMB task | ||
3 | 1..4/10 | 255 | 8 | 3 | 15 | 3Fhex = 63dec Error initializing PLC task mode | ||
3 | 1..4/10 | 255 | 8 | 6 | 15 | 6Fhex = 111dec Unknown sender of a response | ||
3 | 1..4/10 | 255 | 8 | 7 | 0 | 70hex = 112dec Error code in response | ||
3 | 1..4/10 | 255 | 8 | 7 | 1 | 71hex = 113dec No socket found in searched status | ||
3 | 1..4/10 | 255 | 8 | 7 | 2 | 72hex = 114dec Invalid value in request | ||
3 | 1..4/10 | 255 | 8 | 7 | 3 | 73hex = 115dec Error message of TCP task | ||
3 | 1..4/10 | 255 | 8 | 7 | 4 | 74hex = 116dec MODBUS error | ||
3 | 1..4/10 | 255 | 8 | 7 | 5 | 75hex = 117dec No socket available | ||
3 | 1..4/10 | 255 | 8 | 7 | 6 | 76hex = 118dec Invalid socket handle | ||
3 | 1..4/10 | 255 | 8 | 7 | 7 | 77hex = 119dec Timeout in client socket | ||
3 | 1..4/10 | 255 | 8 | 7 | 8 | 78hex = 120dec Socket closed, without response to command | ||
3 | 1..4/10 | 255 | 8 | 7 | 9 | 79hex = 121dec Not ready flag set | ||
3 | 1..4/10 | 255 | 8 | 7 | 10 | 7Ahex = 122dec TCP task no longer ready | ||
3 | 1..4/10 | 255 | 8 | 7 | 11 | 7Bhex = 123dec Watchdog event | ||
3 | 1..4/10 | 255 | 8 | 7 | 12 | 7Chex = 124dec Device in reconfiguration | ||
3 | 1..4/10 | 255 | 8 | 7 | 13 | 7Dhex = 125dec PLC task not initialized | ||
3 | 1..4/10 | 255 | 8 | 7 | 14 | 7Ehex = 126dec OMB server socket closed |
Remark 1):
- The error information is also available at the output ERNO of the blocks used for the Communication Module.
- The following applies: ERNO := 6000hex OR error.