TK502 - Programming Cable

  • Cablel on PC side: SUB-D, 9-pole, female, RS-232, for COM interface
  • Cable on AC500 side: terminal block, 9-pole, female, RS-232, for COM1 interface
  • Cable length: 5 m
../_images/b45e42ef1d1f50970a317f340a0307d4

Purpose

The TK502 cable connects a 9-pole serial COM interface of a PC with the serial COM1 interface of PM57x, PM58x and PM59x. It is used for programming purposes.

Note

With AC500/AC500-eCo Processor Modules, only the ABB programming cables TK50x can be used. Other cables may cause communication faults and must not be used.

Electrical Connection

The 2 plugs are put on the two COM interfaces and the plug at the PC side is tightened then.

Technical Data

Connector at the PC (COM interface) SUB-D, 9-pole, female
Connector at the AC500 CPU (COM1) terminal block, 9-pole, female
Cable length 5 m
Cable type LiYCY 5 x 0,14 mm², shielded
Weight 220 g

Ordering Data

Order No. Scope of delivery Product life cycle status
1SAP 180 200 R0101 TK502, programming cable terminal block / SUB-D, length: 5 m Classic

Note

*) For planning and commissioning of new installations use modules in Active status only.