Technical Data of the Digital Outputs

Parameter		Value
Number of channels per module		8 normally-open relay outputs
Distribution of the channels into groups		2 (4 channels per group)
Connection of the channels O0 to O3		Terminals 10 to 13
Connection of the channels O4 to O7		Terminals 15 to 18
Reference potential for the channels O0 to O3		Terminal 14 (signal name R0..3)
Reference potential for the channels O4 to O7		Terminal 19 (signal name R4..7)
Relay coil power supply		Terminal 20 (plus pole of the process supply voltage, signal name L+). The minus pole is provided by the I/O bus.
Indication of the output signals		1 yellow LED per channel; the LED is on when the output signal is high (signal 1) and the module is powered via the I/O bus
Way of operation		Non-latching type
Relay output voltage
	Rated value	24 V DC or 120/240 V AC
Output delay
	Switching 0 to 1 (max.)	Typ. 10 ms
	Switching 1 to 0 (max.)	Typ. 10 ms
Output data length		1 byte
Output current
	Rated current per channel (max.)	2.0 A (24 V DC / 24 V AC / 48 V AC / 120 V AC / 240 V AC, only resistive loads) 2.0 A (24 V AC / 48 V AC / 120 V AC, only pilot duty) 1.5 A (240 V AC, only pilot duty)
	Rated current per group (max.)	8 A
	Lamp load (max.)	200 W (230 V AC), 30 W (24 V DC)
Spark suppression with inductive AC loads		Must be performed externally according to driven load specification
Switching Frequencies
	With resistive loads	Max. 1 Hz
	With inductive loads	On Request
	With lamp loads	Max. 1 Hz
Output type		Non-protected
Protection type		External fuse on each channel
Rated protection fuse (for each channel)		5 A fast
Short circuit / Overload proof		No, should be provided by an external fuse or circuit breaker
	Overload message	No
	Output current limitation	No
Connection of 2 outputs in parallel		Not possible
Life time of relay contacts (cycles)		100,000 at rated load
Max. cable length
	Shielded	500 m
	Unshielded	150 m