Technical Data of the Relay Outputs

Parameter		Value
Number of channels per module		4 relay outputs
Distribution of channels into groups		4 groups of 1 channel each
Connection of the four relays		See figure Electrical Connection DX531 - Digital Input/Output Module
Galvanic isolation		Between the channels and from the rest of the module
Indication of the output signals		1 yellow LED per channel, the LED is ON when the relay coil is energized
Way of operation		Non-latching type
Output delay (0->1 or 1->0)		On request
Output data length		1 byte
Relay power supply		By UP process voltage
Relay outputs
	Output short-circuit protection	Must be provided externally with a fuse or circuit breaker
	Rated protection fuse	6 A gL/gG per channel
Output switching capacity
	Resistive load, max.	3 A; 3 A (230 V AC), 2 A (24 V DC)
	Inductive load, max.	1.5 A; 1.5 A (230 V AC), 1.5 A (24 V DC)
	Lamp load	60 W (230 V AC), 10 W (24 V DC)
Life time (cycles)		Mechanical: 300 000; Under load: 300 000 (24 V DC at 2 A), 200 000 (120 V AC at 2 A), 100 000 (230 V AC at 3 A)
Spark suppression with inductive AC load		Must be performed externally according to driven load specifications
Demagnetization with inductive DC load		A free-wheeling diode must be circuited in parallel to the inductive load
Switching frequency
	With resistive load	Max. 10 Hz
	With inductive load	Max. 2 Hz
	With lamp load	On request
Max. cable length
	Shielded	1000 m
	Unshielded	600 m