Technical DataΒΆ
The System Data of AC500 and S500 System Data AC500 are valid for standard version.
The System Data of AC500-XC System Data AC500-XC are valid for the XC version.
Only additional details are therefore documented below.
| Parameter | Value |
|---|---|
| State indication | By 5 LEDs PWR, RDY, RUN, STA, ERR |
| Usable CPUs | PM57x, PM58x, PM59x PM57x (-y), PM58x (-y) and PM59x (-y) |
| Usable terminal bases | All TB5xx TB51x-TB54x |
| Current consumption from 24 V DC power supply at the terminal base of the CPU | Typ. 65 mA |
| Internal power supply | Through the communication module interface of the terminal base |
| Maximum number of supported slaves | 125 (DPV0/DPV1) |
| Maximum number of total cyclic input data | 5712 bytes (Status information is separately managed) |
| Maximum number of total cyclic output data | 5760 bytes |
| Maximum number of cyclic intput data | 244 bytes/slave |
| Maximum number of cyclic output data | 244 bytes/slave |
| Configuration data | max. 244 bytes per slave |
| Parametrization data per slave | 7 bytes/slave standard parameters 237 bytes/slave application specific parameters |
| Maximum number of acyclic read/write | 240 bytes per slave and telegram |
| Processor | Hilscher netX100 |
| Internal RAM memory | 8 MB |
| External Flash memory | 8 MB |
| Weight | Ca. 150 g |
Technical Data of the Interface
| Parameter | Value |
|---|---|
| Interface socket | 9-pin, D-sub socket |
| Transmission standard | EIA RS-485 acc. to IEC 61158/61784, potential-free |
| Transmission protocol | PROFIBUS DP |
| Transmission rate | 9.6 kbit/s up to 12 Mbit/s |