Technical Data¶
The System Data of AC500 and S500 System Data AC500 are valid for standard version.
The System Data of AC500-XC System Data AC500-XC are valid for the XC version.
Only additional details are therefore documented below.
| Parameter | Value |
|---|---|
| Field bus | 2 x ETHERNET |
| Transmission rate | 10 MBit/s or 100 MBit/s |
| Protocol | ETHERNET TCP/IP, UDP/IP, MODBUS TCP, ICMP (Ping), DNS, SMTP (email) |
| Field bus connectors | 2 x RJ45, with integrated 2-port switch |
| Processor | Hilscher netX100 |
| Usable CPUs | PM57x, PM58x, PM59x PM57x (-y), PM58x (-y) and PM59x (-y) |
| Usable terminal bases | All TB5xx TB51x-TB54x |
| Communication module interface | Dual-port memory, 16 kByte |
| Current consumption from 24 V DC power supply at the terminal base of the CPU | Typ. 85 mA |
| Internal power supply | Via the communication module interface of the terminal base |
| External RAM memory | 8 MByte |
| External flash memory | 8 MByte |
| State display | PWR, RDY, RUN, STA, ERR, 2 x LINK, 2 x ACT |
| ETHERNET | 10/100 Base-TX, internal switch, 2 x RJ45 socket |
| LED indication | State indication via 5 LEDs |
| Station identification | Rotary switch, 0…255 (00…FFhex) |
| Transmission mode | Half or full-duplex operation, adjustable |
| Transmission rate | 10 or 100 Mbit/s, adjustable |
| Auto negotiation | Optionally adjustable |
| MAC address | Optionally configurable |
| ETHERNET frame types | ETHERNET II (RFC 894), IEEE 802.3 receive only (RFC 1042) |
| Weight | Ca. 170 g |