StandardizationΒΆ
EN 61131-2:2007 compliance statement: AC500/S500 products fully comply with all of the requirements contained in all clauses of this standard, such as indicated by reference to this standard without qualification.
cULus Hazardous Locations approval
Underwriters Laboratories Inc. in accordance with
- UL 508 (Industrial Control Equipment)
- CSA C22.2 No. 142 (Process Control Equipment)
- ANSI/ISA 12.12.01
- CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in Class I, division 2, Group A, B, C, D Tx;
Installation Instructions for cULus Hazardous Locations
- WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is know to be non-hazardous.
- WARNING - Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2 or Zone 2.
- This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF MATERIALS USED IN THE RELAYS.
Standardization: PROFINET
- IEC 61131-3: PLC Standardization
- IEC 61158: PROFINET Standardization
- IEC 11801: Wire and connection elements for ETHERNET
Standardization: CANOPEN
BOSCH CAN specification - version 2.0, part A and part B
ISO 11898
CiA DS 201 V1.1 - CAN Application Layer
CiA DS 301 V3.0 - CAL based Communication Profile for Industrial Systems
CiA DS 301 V4.02 - CANOPEN Application Layer and Communication Profile
CiA DS 401 V2.1 - CANOPEN Device Profile Generic I/O modules
CiA DS 402 V2.0 - CANOPEN Device Profile Driver and Motion Control
CiA DS 406 V3.0 - CANOPEN Device Profile Encoder
Standardization: PROFIBUS DP
IEC61158 / DIN EN series
Standardization: ETHERCAT
- IEC 61131-3: PLC Standardization
- IEC 61158: ETHERCAT Standardization
- IEC 11801: Wire and connection elements for ETHERNET
Note
ETHERCAT is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany