Input Description¶
E01
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| BOOL | - | - | - |
One of the two set points is selected with input E01.
E01 = FALSE → set point S0
E01 = TRUE → set point S1
S0
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| INT | - | - | - |
The set point 0 is specified at input S0.
S1
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| INT | - | - | - |
The set point 1 is specified at input S1.
TH_T
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| INT | - | - | - |
The start up time is specified at input TH_T. At the same time, the start up time TH must be scaled to the cycle time T.
TR_T
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| INT | - | - | - |
STOP
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| BOOL | - | - | - |
The output can be latched to the current value by means of the STOP input.
STOP = FALSE → Output not latched
STOP = TRUE → Output is latched
The STOP input has higher priority than the inputs S and R.
S
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| BOOL | - | - | - |
INIT
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| INT | - | - | - |
The initial value to which the output is to be set if required is specified at input INIT.
R
| Data_Type | Default_Value | Range | Unit |
|---|---|---|---|
| BOOL | - | - | - |
The output can be set to the value 0 with the input R.
R = FALSE → Output is not reset
R = TRUE → Output is reset to value 0.