Output Description

Function Block PUMP_FLOW_CALC

DONE

Data_Type	Default_Value	Range	Unit
BOOL	-	-	-

Output indicates the processing state of the function block. After completion or abortion of processing (due to an error), DONE is set to TRUE for one cycle. This output always has to be considered together with output ERR. If ERR is TRUE, an error occurred. In this case, the error number can be read at output ERNO.

ERR (error)

Data type: BOOL

Output ERR indicates whether an error occurred during data reception. If ERR is TRUE, an error occurred. In this case, the error number can be read at output ERNO.

ERNO (error number)

Data_Type	Default_Value	Range	Unit
WORD	0	³ 0	-

Output provides an error identifier if an invalid value was applied to an input. ERNO always has to be considered together with the output ERR. The value output at ERNO is only valid if ERR is TRUE (see, error messages): Error Messages of the Function Block Libraries

ACT_FLOW (actual flow)

Data type: REAL, default value: 0, range: ³ 0, unit: m³/h

Calculated actual flow of the pump. It is calculated using PQ (power/flow) performance curve of the pump.