LED_SETΒΆ
| Parameter | Value |
|---|---|
| Library_File_Name | SysIntExt_AC500_V13.lib |
| Firmware | V1.3.0 |
| Type | Type_Function_Block_History |
| Group | LED |
This Function Block is used to control the LED states of the AC500 PLCs. Using this Function Block it is possible to access each LED on the AC500 PLC and to change its state and blinking period.
Each LED has to be controlled individually.
The LED assignment depends on PLC type.
CM574:
1 : RUN LED
2 : ERROR LED
3 : COM1 Status LED
4 : COM2 Status LED
5 : READY LED
6 : STAT LED
PM57x, PM58x, PM59x:
1 : RUN LED
2 : ERROR LED
Eco:
1 : RUN LED
2 : ERROR LED
3 : COM1 Status LED
PM595:
1 : RUN LED (green only)
2 : ERROR LED (red only)
3 : CAN LED(green/red/orange)
8 : Batt State LED (green/red/orange)
9 : Function 1 LED (green/red/orange)
10 : Function 2 LED (green/red/orange)
11 : Function 3 LED (green/red/orange)
12 : Function 4 LED (green/red/orange)
13 : Function 5 LED (green/red/orange)
If the LED should be controlled by the runtime system again, just switch the MODE back to 0. (MODE 0 = runtime system , MODE 1 = user program).