PUMP_INTERFACE_VISU_PH

Visualization Faceplate for the Function Block PUMP_INTERFACE.

Colors of the variables

Color	Meaning
white	Actual FALSE and should be FALSE in normal operation
green	Actual TRUE and should be TRUE in normal operation
yellow	Actual FALSE but should be TRUE in normal operation
red	Actual TRUE but should be FALSE in normal operation

Visualization parameters

Variable element	Access	Way of access	Description (all elements refer to the Function Block instance, replaced for the placeholder $FB$)
EN	R/W	Toggle	To enable the Function Block with the true value.
PUMP_ID	R/W	Numpad – value 1 to 3	To enter the ID of the pump.
PRIORITY	R/W	Numpad – value 1 to 3	To enter the priority of the pump.
PUMP_ON	R/W	Toggle	To switch off/On the pump individually. For the FALSE value the user can remove this pump from the network in case of any problem/fault.
PUMP_NOMINAL_SPEED	R/W	Numpad – value 0 onwards	To enter the nominal speed of the pump motor.
FOLLOWER_MODE	R/W	Numpad – value 0 to 2	Follower mode to decide at what speed the follower pumps must move. 0= Fixed, 1=copy master, 2=master speed.
FOLLOWER_REF	R/W	Numpad – value 0 onwards	follower speed reference in RPM, when FOLLOWER_MODE =0, i.e. fixed.
PUMP_READY	R/W	Toggle	Input to attach the ready status of the drive of the pump.
PUMP_OPERATING	R/W	Toggle	Input to attach the operating status of the drive of the pump.
PUMP_TRIPPRED	R/W	Toggle	Input to attach the fault status of the drive of the pump.
PUMP_RUNTIME_RESET	R/W	Toggle	TRUE value of this variable resets the actual runtime to Zero value.
DONE	R		Execution finished when output DONE = TRUE.
ERR	R		Error occurred during execution when output ERR = TRUE.
ENO	R		Error code.
PUMP_START	R		On command to the pump.
PUMP_REF	R		Speed reference to the pump in RPM.
PUMP_REF_FB	R		Field bus speed reference to the pump in the range of -20000 to 20000.
PUMP_RUNTIME	R		Actual runtime of the pump.