CS31CO_EXT¶
Function Block CS31CO_EXT is used to configure the AC31 Modules. The Function Block can send configuration parameters to the AC31 Modules and scan their currently set configuration.
| Parameter | Value |
|---|---|
| Library_File_Name | CS31_AC500_V20.lib |
| Firmware | V2.0 |
| Type | Type_Function_Block_History |
| Group | Group/Subgroup |
Function Block CS31CO_EXT is used to configure the AC31 Modules. The Function Block can send configuration parameters to the AC31 Modules and scan their currently set configuration.
Apart from configuration of the AC31 remote modules, the Function Block can also process further jobs <no title>.
Enable for processing a job once is triggered by a FALSE/TRUE edge at input FREI.
The communication port the CS31 Master is connected to is specified at input COM.
The required job identification is specified at input CODE.
The parameters required for the job are planned at the inputs D1 … D8.
Status messages are signalized at the outputs RDY, OK and ERR.
The response data of the job are available at the outputs A1 … A7.
It may take several PLC cycles to process the job.