5000hex…5FFFhex - Request Error

DEC	HEX	Error description
20482	5002	The request is not supported (e.g. in the simulation mode of the Control Builder).
20485	5005	Invalid internal state -> function block probably called in invalid manner/sequence
20499	5013	Timeout error ECAT_COE_READ, ECAT_COE_Write: Request timeout occurs
20503	5017	Incorrect length ARC..: Invalid data length CAN2..: Invalid DLC in message ETH_UDP..: Invalid data length ECAT_COE_READ, ECAT_COE_Write: Request/ Response length invalid
20504	5018	Traceability data is corrupted.
20507	501B	Access error COM_MOD_MAST: Invalid memory address DATA or DATA + NB. At least one datum is outside of the access range of the user program. The range includes different flag ranges. ETH_MOD_MAST: Invalid memory address DATA or DATA + NB. At least one datum is outside of the access range of the user program. The range includes different flag ranges.
20508	501C	Invalid number (quantity) CAN2A_SEND: Invalid number of messages at input NUM COM_MOD_MAST: Invalid number of data at NB (0 or more than permitted). ETH_MOD_MAST: Invalid number of data at NB (0 or more than permitted).20515
20513	5021	IO_PROD_ENTRY_READ: I/O Module not found: input MODULE invalid
20515	5023	Failed to read traceability data from I/O Module.
20517	5025	Address error ARC..: Invalid IP address CAN2..: Invalid identifier in message COM_MOD_MAST: Invalid slave address. Broadcast not permitted in connection with the selected function code. ETH_MOD_MAST: Invalid slave address. Broadcast not permitted in connection with the selected function code. ETH_UDP..: Invalid IP address.
20518	5026	Function error COM_MOD_MAST: Invalid function code FCT. ETH_MOD_MAST: Invalid function code FCT.
20735	50FF	DIAG..: Simulation mode
24575	5FFF	Operation pending / busy -> wait and try again later