Channel \ parameters for the analog outputs (2x)¶

Name	Value	Internal value	Internal value, type	EDS Slot / Index
0 Output 0, Channel configuration	see DA502 - Digital/Analog Input/Output Module	see DA502 - Digital/Analog Input/Output Module	BYTE	0x0Y11
Output 0, Check channel	see DA502 - Digital/Analog Input/Output Module	see DA502 - Digital/Analog Input/Output Module	BYTE	0x0Y12
Output 0, Substitute value	see DA502 - Digital/Analog Input/Output Module	see DA502 - Digital/Analog Input/Output Module	WORD	0x0Y13
Output 1, Channel configuration	see DA502 - Digital/Analog Input/Output Module	see DA502 - Digital/Analog Input/Output Module	BYTE	0x0Y14
Output 1, Check channel	see DA502 - Digital/Analog Input/Output Module	see DA502 - Digital/Analog Input/Output Module	BYTE	0x0Y15
Output 1, Substitute value	see DA502 - Digital/Analog Input/Output Module	see DA502 - Digital/Analog Input/Output Module	WORD	0x0Y16

Channel configuration¶
Internal value	Operating modes of the analog outputs, individually configurable
0 (default)	Not used
128	-10 V…+10 V
129	0…20 mA
130	4…20 mA

Channel monitoring¶
Internal value	Check channel
0	Plausib(ility), Cut wire, Short circuit
3	None

Substitute value¶
Intended behavior of output channel when the control system stops	Required setting of the module parameter “Behavior of outputs in case of a communication error”	Required setting of the channel parameter “Substitute value”
Output OFF	Off	0
Last value infinite	Last value	0
Last value for 5 s and then turn off	Last value 5 s	0
Last value for 10 s and then turn off	Last value 10 s	0
Substitute value infinite	Substitute value	Depending on configuration
Substitute value for 5 s and then turn off	Substitute value 5 s	Depending on configuration
Substitute value for 10 s and then turn off	Substitute value 10 s	Depending on configuration