Terminals at the Terminal Unit¶

Terminal type: Screw-type terminal

Front terminal, conductor connection vertically with respect to the printed circuit board.

Terminal Units with Product Index < C0 e. g. 1SAP 212 200 R0001 B0

Number of cores per terminal	Conductor type	Cross section
1	Solid	0.08 mm² to 2.5 mm²
1	Flexible	0.08 mm² to 2.5 mm²
1 with wire end ferrule	Flexible	0.25 mm² to 1.5 mm²

2	Solid	Not intended
2	Flexible	Not intended
2 with TWIN wire end ferrule (length 10 mm) with plastic sleeve	Flexible	2 x 0.25 mm² or 2 x 0.5 mm² or 2 x 0.75 mm², with square cross-section of the wire-end ferrule also 2 x 1.0 mm²

Terminal Units with Product Index ³ C0 , e. g. 1SAP 212 200 R0001 C0

Number of cores per terminal	Conductor type	Cross section
1	Solid	0.08 mm² to 2.5 mm²
1	Flexible	0.08 mm² to 2.5 mm²
1 with wire end ferrule without plastic sleeve	Flexible	0.08 mm² to 2.5 mm²
1 with wire end ferrule with plastic sleeve	Flexible	0.14 mm² to 1.5 mm²

2	Solid	0.08 mm² to 1.5 mm²
2	Flexible	0.08 mm² to 1.5 mm²
2 with TWIN wire end ferrule (length 10 mm) with plastic sleeve	Flexible	2 x 0.5 mm² to 2 x 1.0 mm²
2 with separate wire end ferrule without plastic sleeve	Flexible	0.08 mm² to 0.75 mm²

Terminal type: Spring \ terminal

Front terminal, conductor connection vertically with respect to the printed circuit board.

Type	Front terminal
Degree of protection	IP 20
Stripped conductor end	9 mm, min. 8 mm
Needed tool	Slotted screwdriver
Dimensions	2.5 x 0.4 to 3.5 x 0.5 mm, screwdriver must be at least 15 mm free of insulation at the tip

Number of cores per terminal	Conductor type	Cross section
1	Solid	0.08 mm² to 2.5 mm²
1	Flexible	0.08 mm² to 2.5 mm²
1 with wire end ferrule	Flexible	0.25 mm² to 1.5 mm²

2	Solid	Not intended
2	Flexible	Not intended
2 with TWIN wire end ferrule (length 10 mm) with plastic sleeve	Flexible	2 x 0.25 mm² or 2 x 0.5 mm² or 2 x 0.75 mm², with square cross-section of the wire-end ferrule also 2 x 1.0 mm²