Programming via CPU with Serial Driver “ABB \ RS232 Route AC”

The following figure shows the setting of a gateway channel for COM5 of the PC with routing to the CM574-RS plugged into slot 1 (line 1).

../_images/806dbfdfe38c10a80a33139000eba54e

The following settings have to be specified:

Port Serial interface (COMx) of the PC, in the example: COM5
Baud rate Baud rate of COMx of the AC500 CPU
Routing levels 1
Communication Module (Level 1) Line 1
Address (Level 1) 0,0,0,0,0
Motorola byteorder Yes