Programming via CPU with ETHERNET Driver “ABB Tcp/Ip Level2 AC”

The following figure shows the setting of a gateway channel for connection via the AC500 CPU with the IP address 192.168.3.10 with routing to the CM574-RS plugged into slot 2 (line 2).

../_images/39d31006e38c0ffd0a33139000eba54e

The following settings have to be specified:

Address - IP address of the AC500 CPU, in the example: 192.168.3.10
Routing levels - 1
Communication Module (Level 1) - Line 2
Address (Level 1) - 0,0,0,0,0
Motorola byteorder - Yes