PUMP_ SLEEP _VISU_PH¶
Visualization Faceplate for the Function Block PUMP_ SLEEP.
| Color | Meaning |
|---|---|
| white | Actual FALSE and should be FALSE in normal operation |
| green | Actual TRUE and should be TRUE in normal operation |
| yellow | Actual FALSE but should be TRUE in normal operation |
| red | Actual TRUE but should be FALSE in normal operation |
| Variable element | Access | Way of access | Description (all elements refer to the Function Block instance, replaced for the placeholder $FB$) |
|---|---|---|---|
| EN | R/W | Toggle | To enable the Function Block with the true value. |
| PUMP_ID | R/W | Numpad- value 1 to 3 | To enter the ID of the pump which is to be cleaned. |
| SLEEP_MODE | R/W | Numpad- value 0 to 4 | SLEEP MODE: 0= Not Used, 1= Internal, 2 = External, 3 = Int+Ext, 4 = Soft Ext. |
| ACT_VALUE | R/W | Numpad- value 0 to 100.0 | Actual process value which is compared with the sleep level. |
| SLEEP_LEVEL | R/W | Numpad- value 0 to 100.0 | Defines the level to active the sleep function. |
| SLEEP_DELAY | R/W | Numpad- value 0 onwards | Time delay for the sleep function to get activated. |
| SLEEP_EXT | R/W | Toggle | To enable the sleep function externally. |
| SLEEP_BOOST_STEP | R/W | Numpad- value 0 to 100.0 | The setpoint is increased by boost step percentage for the time defined by sleep boost time. |
| SLEEP_BOOST_TIME | R/W | Numpad- value 0 onwards | Time in seconds for which sleep boost is to be operational. |
| WAKEUP_MODE | R/W | Numpad- value 0 to 3 | Wake up mode: 0= wake > ref, 1= wake < ref , 2 = wake > Ext, 3 = wake < Ext. |
| WAKEUP_LEVEL | R/W | Numpad- value 0 to 100.0 | Defines the level to active the wake up function. It is a percentage of setpoint. |
| WAKEUP_DELAY | R/W | Numpad- value 0 onwards | Time delay for the wake up function to activate. |
| WAKEUP_EXT_LEVEL | R/W | Numpad- value 0 to 100.0 | Wake up external level. For wake up mode 2 and 3, this value is compaired with actual value. |
| PUMP_SETPOINT | R/W | Numpad- value 0 to 100.0 | Process setpoint - the same setpoint connected in the PUMP_PID Function Block. |
| SLEEP_RPM | R/W | Numpad- value 0 onwards | Pump RPM below which pump should go in to the sleep mode. |
| ACT_RPM | R/W | Numpad- value 0 onwards | Actual RPM of the pump. |
| DONE | R | Execution finished when output DONE = TRUE. | |
| ERR | R | Error occurred during execution when output ERR = TRUE. | |
| ENO | R | Error code. | |
| STATUS | R | Status of sleep function. 0 = Function is inactive 1 = Sleep Function is active 2 = Boost Function is active 3 = Wake up Function is active |